|| Company Profile |  Business Opportunities | Jobs@Rotomac |  Enquiry Form | Home ||
 
SERIES "BA" – Barrel Emptying Pump

Performance Data
Max. Capacity 25 M3/Hr
Max. Pressure 12 bar or more for system pressures
Max. Temperature 1400C
Max. Viscosity 100,000 CSt
Max. Solid Size  Soft & Compressible 40 mm, Hard & angular 10 mm

 Salient Features

  • "BA" Series pumps are designed with ‘bonded to metal’stator; encased/threaded to pump barrel to suit narrow opening of drums etc.
  • Driven by flange-mounted motors, suitable for vertical operation.
  • Long Coupling rod and pump casing to suit immersion depth.
  • Wide choice of materials to suit corrosive and / or abrasive media.
  • Standard Design incorporates a Mechanical Seal with open box type housing
  • Open pin Joint for clean in place (CIP) where food / edible products are to be handled.
Material of Construction
Housing Components Cast Iron, Cast Steel, AISI-304, AISI-316 & AISI-316L
Rotating Parts Rotor, Shafts, Coupling Rods, Pins & Bushes in Alloy Steel, AISI-304, AISI-316, AISI-316L or other exotic Monel Alloys.
Stator Stator Hardness in 600A & 700A, Black or White both available from a wide range of polymer choice such as Natural, Nitrile, Neoprene, Butyl, EDPM, Silicon, Viton or PTFE, Non-Contaminating Food Grade Stators also available.

Fluids Handled / Applications

Emptying Viscous and Abrasive liquids from drum or vessels e.g. Grease, Varnish, Lubricating Oil, Furnace Oil, Ceramics etc. Used as semi-submersible pumps for pumping liquids that cannot be lifted by pump suction (e.g. from underground pits) such as Heavy Molasses, Waste Oil scum. Variety of fluids like Acids, Drug Formulations, Beer, Chemical solutions, Diesel Oil, Aerated Liquids, Inverted Sugar Syrup, Tomato Paste, Oyster Sauce, Thick chocolate, Condensed Milk, Marmalade, Butter Oil etc.
 
SERIES "BH" – Bore Hole Pumps for Drinking, Irrigation & Industrial use.
Performance Data
Max. Capacity 100 M3/Hr
Max. Pressure 12 bar or more for system pressures
Max. Temperature 1000C
Max. Viscosity 200 CSt

 
Salient Features
  • Pump is capable of handling sand laden or brackish or geothermal water with ease.
  • Driven through a series of shafts supported by water lubricated rubber bearings, through drive head installed on ground level.
  • Can be driven by an electric or Solar Powered Motor or Diesel Engine and provides option for changing pumps speed to match bore well yield.
  • Smaller bore diameter reduces drilling costs.
  • Flow rates unaffected by change in lavel of water table.
Material of Construction
Housing Components Cast Iron, Cast Steel, AISI-304, AISI-316 & AISI-316L
Rotating Parts Rotor, Shafts, Coupling Rods, Pins & Bushes in Alloy Steel, AISI-304, AISI-316, AISI-316L or other exotic Monel Alloys.
Stator Stator Hardness in 600A & 700A, Black or White both available from a wide range of polymer choice such as Natural, Nitrile, Neoprene, Butyl, EDPM, Silicon, Viton or PTFE, Non-Contaminating Food Grade Stators also available.
Base Frames Mild Steel or Stainless Steel (cladded or whole) Fabricated.

Fluids Handled / Applications

Underground Water for drinking, irrigation and industrial use.

  
SERIES "SM" – Special Designed Pumps for Sugar Mills & distillery
Performance Data
Max. Capacity 100 M3/Hr
Max. Pressure 24 bar or more for system pressures
Max. Temperature 1200C
Max. Viscosity 100,000 CSt
Max. Solid Size Soft & Compressible 120 mm, Hard & angular 30 mm

 
Pump Model Suction/Delivery
Size		 Pump RPM Capacity
MT/Hr		 Head
(MLC)
POWER (HP)
ABS.         REC.
SM-02 2"X2" 450 7.0
6.0		 30
45		 1.1
1.5		 1.5
2.0
SM-03 3"X3"  450 17.0 
14.0		 30
45		 2.5
3.5		 3.0
5.0 
SM-04 4"X4"  450 30.0
26.0 		 30
45		 5.0
7.5		 7.5
10.0
SM-06A 6"X6" 400 45.0
42.0		 30
45 		 10.0
12.5 		 12.5
15.0 
SM-08 8"X8"  320 55.0
50.0		 30
45		 15.0
20.0 		 20.0
25.0
SM-10 10"X10" 320 100.0
94.0		 30
45 		 20.0
25.0		 25.0
30.0
(Specific Gravity assumed 1.5)
Salient Features
  • Positive displacement, inherently self-priming and capable of handling entrapped gases.
  • Inherently non clogging and capable of handling high percentage of solids.
  • Continuous pulsation free flow with minimum turbulence and low internal velocity within the pump.
  • Doubled sealed articulation joints for longer service life of critical components.
  • Temperature range upto 120OC.
  • Simple maintenance, sturdy construction, no valves needed which would impede the flow.
  • Low NPSH, higher suction with up to 8.4 meter of water column and capable of developing high pressure up to 24 bar even at low pump speed .
  • Efficiently handles Non-Newtonian media, slurries and fibrous contents up to 1 million centipoise.
  • Capability of variation in flow rate by just changing the pump speed.
  • Capability to work on uneven/inclined surfaces.
  • Elimination of gearbox.
  • Simple construction and high reliability of operation.
  • Energy conservation and minimum installation space requirement.
Material of Construction
Housing Components Cast Iron, Cast Steel, AISI-304, AISI-316 & AISI-316L
Rotating Parts Rotor, Shafts, Coupling Rods, Pins & Bushes in Alloy Steel, AISI-304, AISI-316, AISI-316L or other exotic Monel Alloys.
Stator Stator Hardness in 600A & 700A, Black or White both available from a wide range of polymer choice such as Natural, Nitrile, Neoprene, Butyl, EDPM, Silicon, Viton or PTFE, Non-Contaminating Food Grade Stators also available.
Base Frames Mild Steel or Stainless Steel (cladded or whole) Fabricated.

Fluids Handled / Applications

All type/grade of Molasses, Melt, Sulphited Syrup, Milk of Lime, Clear & Muddy Juice, Fondant Mix, Calcium Carbonate Sludge, Press Water with Beet Chips, etc.
 
"ROTOMAC" Solid Macerator – The unbeatable choice
Performance Data
Max. Capacity  80 M3/Hr
Max. Temperature  800C
Max Solid Size (Input)   80 mm
Max Solid Size (Output)   7 mm x 7 mm x 50 mm
Max Solid Content  8%

 
Material of Construction
Housing Components Cast Iron, Cast Steel, AISI-304 or AISI-316
Rotating Parts Alloy Steel, AISI-304 or AISI-316 with Carbide Tipped Blades.

Fluids Handled / Applications

The Solid Macerator can be used in inline (on the suction side) with a suitable Progressive Cavity Pump to chop down large solids into thinner pump-able slices. 

  • Domestic Sewage, Raw Sewage.
  • Thickened Effluent Sludge with up to 8% solid contents.
  • Soft Solids e.g. Fruits, Vegetables.
  • Tannery effluent containing leather pieces, fleshing etc.
  • Plastic industry effluents.
  • Butchery Waste containing animal intestines, bones etc.
 
ROTOMAC INDUSTRIES (P) LTD.
D-4A, PANKI INDUSTRIAL AREA, SITE - 1
KANPUR - 208022
INDIA
PHONE : +91-512-2691704 / 705
FAX : +91-512-2691706
EMAIL : marketing@rotomacpump.com
 || Company Profile | Product Range | Business Opportunities | Jobs@Rotomac | Enquiry Form | Home ||
Copyright © 2000, Rotomac Industries (P) Ltd.
Best viewed with NETSCAPE 3.0+ and INTERNET EXPLORER 3.02+,
in 800 x 600 resolution
If you have any problem in browsing this site, please contact WEBMASTER.