• Torsion free metal Bonded stator for increased life, higher efficiency and per stage pressure
• High Suction lift capability up to 8.4 MWC
• Double articulated sealed joints ensures smooth power transmission and longer service life of critical components. Alternately, Cardan Joints and Flexishaft design options are also available.
• Shaft sealing standardized to ISO 3069. Allows mounting or dismantling without disassembling shafts from the bearing. Shaft sleeves provided optionally.
• Handles solid in suspension or mixture containing high percentage of solids.
• Works on snore i.e., handles high percentage of air with liquid. 
• Very low internal velocity reduces wear due to erosion and corrosion.
• Metered uniform flow with minimal pulsation avoids risk of damage to shear sensitive products.
• Gate and Check Valves not needed as the pump are self priming.
• Suction & Delivery ends can be interchanged by merely changing the direction of rotation of the pump.
• Handles any liquid from water to abrasive slurry and froth to viscous media.
• Conveniently located inspection windows available optionally.
• Tapered roller bearing design available for longer life and better thrust load bearing capacity.
• Available in Bare shaft or Close coupled configurations.

Fluids Handled / Applications

Chemical Slurry, Acrylic Emulsion, Adhesives & Sealant, Bulk Explosives and Emulsion Matrix, Alum,
Aluminum Hydroxide Gel, Bentonite Slurry, Black Liquor, Bitumen, Casein Slurry, Ceramic/Clay Slip,
Detergent & Soap Slurry, Dyestuff & Intermediates, De-Waxed Gum & Oils, Drilling Mud, Electroplating
Solution, Epoxy Mix, Ferrite Slurry, Fuel Oil Sludge, Flocculent, Glue, Gum Sludge, Grout Mix, Instant
Tea, Lime Slurry, Lube Oil, Lacquer, Molasses, Melt, Paint & Varnish, Mine Water, Palm Oil, Paper &
Cellulose Pulp, Paper Coating Mix, Printing Ink, Petroleum Jelly, Petrochemicals, Resins, Rice Bran Oil,
Soap Stock, Sewage Sludge (Raw & Digested), Sodium Silicate, Sulphited Syrup, Solvents, Starch &
Oils, Viscose, Yeast, Waste Water & Effluent Sludge, Xylene, Zinc Chloride, Zinc Sulphate AND MANY 
MORE NUMEROUS FLUIDS.

• Hopper type suction inlet-eases entry of thick ‘Plastico-Viscous’ material.
• Forced feed augar to push ‘difficult to flow’ media into pumping cavity.
• Solid shaft- Handles solids with ease.
• Available in Bareshaft or Close coupled configurations
• Wide choice of materials to suit corrosive and / or abrasive media
• Torsion free metal Bonded stator for increased life, higher efficiency and per stage pressure
• High Suction lift capability up to 8.4 MWC
• Double articulated sealed joints ensures smooth power transmission and longer service life of critical components. Alternately, Cardan Joints and Flexishaft design options are also available.
• Shaft sealing standardized to ISO 3069. Allows mounting or dismantling without disassembling shafts from the bearing. Shaft sleeves provided optionally.
• Handles solid in suspension or mixture containing high percentage of solids.
• Works on snore i.e., handles high percentage of air with liquid. 
• Very low internal velocity reduces wear due to erosion and corrosion.
• Metered uniform flow with minimal pulsation avoids risk of damage to shear sensitive products.
• Gate and Check Valves not needed as the pump are self priming.
• Suction & Delivery ends can be interchanged by merely changing the direction of rotation of the pump.
• Handles any liquid from water to abrasive slurry and froth to viscous media.
• Conveniently located inspection windows available optionally.
• Tapered roller bearing design available for longer life and better thrust load bearing capacity.
• For food and beverage applications, aseptic design in complete Stainless Steel construction and port flanges in SMS/IDF available.
• Available in Bare shaft or Close coupled configurations.

Material of Construction (for "WF")

Housing Components	AISI-304, AISI-316 & AISI-316L finished to 3A US Sanitary Standards
Rotating Parts	Rotor, Shafts, Coupling Rods, Pins & Bushes in AISI-304, AISI-316 or AISI-316L
Stator	Stator Hardness in 600A & 700A, Black or White both available from a wide range of polymer choice such as Natural, Nitrile, Neoprene, Butyl, EDPM, Silicon, Viton or PTFE, Non-Contaminating Food Grade Stators also available.
Base Frames	Mild Steel or Stainless Steel (cladded or whole) Fabricated.

Fluids Handled / Applications

Media with solid content e.g. De-watered effluent sludge, High consistency Paper Pulp, Very thick pasty viscous media like Bulk Explosives & Emulsion Matrix/Mix, Filter cakes e.g. Soya cake, Difficult to flow abrasive media such as Grout Mix, Magma, Massecuite, Waste Asbestos Slurry , Printers Ink Paste, Viscous Chemical Slurry, Emulsions, Aluminum/Magnesium Hydroxide Paste, Adhesives & Sealant, Cement Slurry, Chyawanprash, Chocolate Mix, De-Waxed Gum & Oils, Drilling Mud, Epoxy Mix, Fuel Oil Sludge, Glue, Gum Sludge, Grout Mix, Instant Tea, Paper & Cellulose Pulp, Paper Coating Mix, Petroleum Jelly, Resins, Sewage Sludge (Raw & Digested), Sodium Silicate, Toothpaste, Fruit & Vegetable Mash, Viscose, Yeast, Food Products like Noodles, Rava/Idli Mix, Shrikhand, Ghee, Lecithin, Lithophone Paste, Non-Newtonian fibrous and low moisture content slurry, AND MANY MORE NUMEROUS FLUIDS.

Similar to "WA.F" Series but with additional Bridge-Breaker side paddle to sweep the media into the augar thereby preventing any bridge formation over the hopper inlet. The hopper is enlarged and fabricated with vertical side walls to prevent build-up of material along the wall. Available in Bare shaft or Close coupled configurations.

Material of Construction (for "HA")

Housing Components	Cast Iron, Cast Steel, AISI-304, AISI-316 & AISI-316L
Rotating Parts	Rotor, Shafts, Coupling Rods, Pins & Bushes in Alloy Steel, AISI-304, AISI-316, AISI-316L or other exotic Monel Alloys.
Stator	Stator Hardness in 600A & 700A, Black or White both available from a wide range of polymer choice such as Natural, Nitrile, Neoprene, Butyl, EDPM, Silicon, Viton or PTFE, Non-Contaminating Food Grade Stators also available.
Base Frames	Mild Steel or Stainless Steel (cladded or whole) Fabricated.

Material of Construction (for "HF")

Housing Components	AISI-304, AISI-316 & AISI-316L finished to 3A US Sanitary Standards
Rotating Parts	Rotor, Shafts, Coupling Rods, Pins & Bushes in AISI-304, AISI-316 or AISI-316L
Stator	Stator Hardness in 600A & 700A, Black or White both available from a wide range of polymer choice such as Natural, Nitrile, Neoprene, Butyl, EDPM, Silicon, Viton or PTFE, Non-Contaminating Food Grade Stators also available.
Base Frames	Mild Steel or Stainless Steel (cladded or whole) Fabricated.

Fluids Handled / Applications

Media with extremely high solid content e.g. De-watered effluent sludge having more than 10% solids, Paper pulp having 12 to 21 % consistency. Lumpy sticky substance such as Grease, Filter Cakes e.g. Soya cake, Okara etc.

• Pump housing and wettable parts have streamlined designed without any product retaining pockets and are fabricated from smooth, polished stainless steel for hygiene and ease of cleaning.
• Choice of Open pin joint; designed for ease of cleaning in place (CIP) for lubricating fluids or Double sealed pin type universal joint with food grade lubrication for abrasive or non-lubricating media.
• Quick Clean,Easy to dismantle design with only two tie rods holding pumps housing and stator assembly.
• Can be operated with discharge on gland to prevent air intake.
• End connections as per food industries standards e.g. IDF/SMS/DIN/JIS Clamp & Ferrule Type
• Torsion free metal Bonded stator for increased life, higher efficiency and per stage pressure
• High Suction lift capability up to 8.4 MWC
• Shaft sealing standardized to ISO 3069. Allows mounting or dismantling without disassembling shafts from the bearing. Shaft sleeves provided optionally.
• Handles solid in suspension or mixture containing high percentage of solids.
• Works on snore i.e., handles high percentage of air with liquid. 
• Very low internal velocity reduces wear due to erosion and corrosion.
• Metered uniform flow with minimal pulsation avoids risk of damage to shear sensitive products.
• Gate and Check Valves not needed as the pump are self-priming.
• Suction & Delivery ends can be interchanged by merely changing the direction of rotation of the pump.
• Handles any liquid from water to abrasive slurry and froth to viscous media.
• Tapered roller bearing design available for longer life and better thrust load bearing capacity.
• Available in Bare shaft or Close coupled configurations.

Fluids Handled / Applications

Viscous Fruit Pulps or Vegetable Sauces e.g. Mango Pulp, Tomato Puree, Honey, Cheese, Crushed, Sliced or Whole fruits or nuts in syrups or juices e.g. Grapes, Diced Cooked Apples. Shear Sensitive foods e.g. Lactose, Viscous personal care or Pharmaceutical formulation e.g. Facial creams, Medicinal Syrups, Other e.g.- Chocolate, Yeast, Ice-cream, Marmalade, Malt Extract. Lumpy or sticky substances like bakery dough, cooked cheese, Cake Mix, Minced Meat or Fish, Thickened Viscous Fruit Pulp, Jams, Mashed fruit e.g. Grapes Mash, Viscous personal care or Pharmaceutical formulations e.g. Tooth paste. Amla Pulp, Beer, Beverages, Butter Oil, Cream, Confectionery, Curd, Dematerialized Water, Diced Vegetables, Lotions, Cream, Squashes, Tamarind Extract, Vegetable Refined Oil, Wine, Yeast etc.