|| Company Profile | Product Range | Business Opportunities | Jobs@Rotomac | Home ||

To enable us select the best suited type & size of the ROTOMAC PC Pump, please fill in the details given below as completely as possible and submit it to us, to enable us quote suitably.
(Leave the details blank, where you don't have the information.) 

A. PUMP
Pumping Media 
(Please mention the full & correct name)
Application  Filter 
Meter 
Transfer 
Others (Please specify) 
Pumping Temperature (ºC)  Minimum Normal Maximum 
Installation  Indoor Outdoor
Duty Conditions per day Hours Continious Intermittent
Specific Wt. of the media (Kg/M³)
Viscosity (CP, cSt, SSU etc.)
Is it similar to water Honey Glue Toothpaste Mortar
Suction Head (M) From what depth shall the liquid be sucked (M) (+)    (-) 
Is the pump standing deeper than the liquid to be pumped Yes No
If yes, how deep 
Vapour Pressure (bar.a)
Vacuum (mm Hg)
Discharge Head (M) To what height shall the liquid be pumped (M) 
Discharge Pressure (bar)
How far shall the liquid be pumped (M)
Differential Pressure (bar)
Total % of solids w/w v/v w/v v/w
Solids Size (mm) Av. Max
Nature of Solids Soft & Compressible Hard & Angular
NPSH.A (bar.a)
Shaft Sealing preferred Gland Packed Mech.Seal
Give details with API plan, if applicable 
Position of Suction Port preferred
(when viewed from DE)		 End Top 90°RH 90°LH
Position of Delivery Port preferred
(when viewed from DE)		 End Top 90°RH 90°LH
Suction & Delivery Port rating confirming to which standard
Flow Rate (M³/Hr) FixedVariable  MinimumMaximum
Type of Drive preferred V-Belt Drive 
Coupled to Motor 
Coupled to Geared Motor 
Coupled to Gearbox & Gearbox Coupled to Motor 
Coupled to Eddy Current Drive 
Coupled to Motor driven by AC V/F drive 
Coupled to Mechanical Speed Variac Coupled to Motor 
Other (Please Specify) 
Relief Valve required Yes No
If Relief Valve required Set Pressure Kg/cm²    Blow Down Pressure Kg/cm²
Type of Coupling preferred Pin Bush Jaw Spacer Fluid
pH of the Pumping Media
Concentration (%)
What Material of Construction you would prefer for the wettable parts
What Material of Construction is being used for the Piping
Is any other pump being used for the above application YesNo
If yes, please give details such as type, make, size etc.
What is the AC rating used to run these pumps in your country Volts Hz
How many pumps do you want Nos.
Your Status End User 
Consultant 
OEM 
Distributor 
Other (Please Specify) 
Place of Destination where the pumps are to be shipped (Please mention port/city, state & country)
Mode of despatch/shipment preferred Road Sea Air
Purpose of the above query Budgetary Purchase
Please mention other relevant details in the space provided herein

 
 
 
B. SPARES
Make/Brand of the pump for which the spares are required
Model, Type & Size
Name of the items required with it's material specification & quantity
Can you provide a free sample on returnable basis for development purpose Yes No
Any other details you would like to furnish and is important regarding the operating conditions of the pump

 
About Yourself
Name:
Designation:
Company:
Address:
City:
State:
PIN Code:
Country:
Email:
Phone Number:
Fax Number:
Your Enquiry
 
ROTOMAC INDUSTRIES (P) LTD.
D-4A, PANKI INDUSTRIAL AREA, SITE - 1
KANPUR - 208022
INDIA
PHONE : +91-512-2691704 / 705
FAX : +91-512-2691706
EMAIL : marketing@rotomacpump.com
 || Company Profile | Product Range | Business Opportunities | Jobs@Rotomac | Home ||
Copyright © 2000, Rotomac Industries (P) Ltd.
Best viewed with NETSCAPE 3.0+ and INTERNET EXPLORER 3.02+,
in 800 x 600 resolution
If you have any problem in browsing this site, please contact WEBMASTER.